Power Supplies, Inverters, and Electronic Loads from TDI


	RBL 488 Series 800 Series

	• Full Product PDF

TDI

Home •

Products •

Request a Quote •

Engineering & Reliability •

What's NEW•

Company Overview •

Contact •

related links •

Email WonATech •

Features

	• High Speed Adjustable Slew Rate • Front Panel or Remote Control • Operation to Less Than 200mv • Pulse Load Shaping • Full Range Switching
General Specifications

OPERATION: Constant Current: 0 to selected full scale current Prog. Accuracy (Range): (high/med) ranges: ±0.25% (low) range: ±0.5% Regulation: ±0.1% of selected full scale Resolution(IEEE): 1/4000 of selected full scale Constant Resistance: Constant Resistance mode operates in Amps/Volt, IEEE units entered in ohms or A/V Prog. Accuracy: ±3% of selected full scale Regulation: ±3% of selected full scale Resolution(IEEE): 1/4000 of selected full scale Constant Voltage: 0 to selected selected full scale Prog. Accuracy (Range): (high/med) ranges:±0.25% (low): ± 0.5% Regulation: ±0.15% of selected full scale Resolution(IEEE): 1/4000 of selected full scale Constant Power: 0 to full scale power Prog. Accuracy: ±3% of full scale Regulation: ±3% of full scale Resolution(IEEE): 0.25% of full scale power ANALOG MODE Ext. Prog: 0 to 10 Volts input yields 0 to selected full scale loading in all operating modes. Input Impedance: 330k Ohms Prog. Response: Limited by internal adjustable slew rate limiter PULSE MODE Frequency: 0.06Hz to 20kHz Accuracy: 0.1% Duty Cycle: 0 - 100%(IEEE),10 - 90%(Analog) Accuracy: 0.1% Adjustable Slew Rate: Max: 0 to full scale in 10µS Min: 0 to full scale in 10mS OUTPUT SIGNALS Current Sample Output: Scaling: 10 Volts = selected full scale	Accuracy: ±0.5% of selected full scale Sync Output: Timing: Synchronous with pulse generator. Output: Sink with 10k pull up to +15V PROTECTION Current Limit: Analog Models: Approximately 105% of selected full scale current Range(IEEE): 0 - 105% of selected full scale Resolution(IEEE): 0.5% of selected full scale Voltage Limit: Analog Models: Load disconnect at 105% of selected full scale voltage Range(IEEE): 0 - 105% of selected full scale Resolution(IEEE): 0.5% of selected full scale Power Limit: Analog Models: Approximately 4250 Watts Range(IEEE): 0 - 4200 Watts Resolution(IEEE): 20 Watts Thermal: Load disconnect at internal temperature of 105°C Undervoltage: Load inhibited at less than1 Volt, when enabled IEEE-488 READBACKS Current: Resolution: 1/4000 of Selected Full Scale Accuracy(Range): (High/Med): ±0.25% ±1 Digit (Low): ±0.5% ±1 Digit Voltage: Resolution: 1/4000 of Selected Full Scale Accuracy(Range): (High/Med): ±0.25% ±1 Digit (Low): ±0.5% ±1Digit Power: Resolution: 1 Watt Accuracy: 0.50% MISCELLANEOUS AC Input: User Selectable 100VAC, 120VAC, 200VAC, 240VAC, ±10%, 48 - 62 Hz @ 350W Ambient Temp: 0°C to 40°C
SAFE OPERATING AREA & SPECIFICATIONS

The RBL488-800 watt series is sleek and compact. The 800W model is ready to address all low to mid power load and test requirements and provides all modes of operation, all functions, full scale range switching and master/slave paralleling standard. The 800W RBL model provides the customer the ultimate in flexibility when it comes to decision time! Stand alone or 19 inch rack mountable (see accessories page 33). This series will meet or exceed all your performance, reliability and quality expectations.
RBL488 50-150-800

OPERATING RANGES (FULL SCALES) Voltage: 10 Volts, 20 Volts, 50 V olts Current: 2 Amps, 20 Amps, 150 Amps Power: 800 Watts Short Circuit: 0.0026 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 2A 20A 150A 10V 0-.1 A/V 0-1 A/V 0-7.5 A/V 20V 0-.05 A/V 0-.5 A/V 0-3.75 A/V 50V 0- .02 A/V 0-.2 A/V 0-1.5 A/V Low Ohms Mode Range 2A 20A 150A 10V 0-1 A/V 0-10 A/V 0-75 A/V 20V 0-.5 A/V 0-5 A/V 0-37.5 A/V 50V 0-.2 A/V 0-2 A/V 0-15 A/V
RBL488 100-120-800

OPERATING RANGES (FULL SCALES) Voltage: 10 Volts, 50 Volts, 100 Volts Current: 2 Amps, 20 Amps, 120 Amps Power: 800 Watts Short Circuit: 0.007 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 2A 20A 120A 10V 0-.1 A/V 0-1 A/V 0-6 A/V 50V 0-.02 A/V 0-.2 A/V 0-1.2 A/V 100V 0-.01 A/V 0-.1 A/V 0-.6 A/V Low Ohms Mode Range 2A 20A 120A 10V 0-1 A/V 0-10A/V 0-60 A/V 50V 0-.2 A/V 0-2 A/V 0-12 A/V 100V 0-.1 A/V 0-1 A/V 0-6 A/V
RBL488 400-120-800

OPERATING RANGES (FULL SCALES) Voltage: 20 Volts, 200 Volts, 400 Volts Current: 2 Amps, 20 Amps, 120 Amps Power: 800 Watts Short Circuit: 0.03 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 2A 20A 120A 20V 0-.05 A/V 0-.5 A/V 0-3 A/V 200V 0-.005 A/V 0-.05 A/V 0-.3 A/V 400V 0-.0025 A/V 0-.025 A/V 0-.15 A/V Low Ohms Mode Range 2A 20A 120A 20V 0-.5 A/V 0-5 A/V 0-30 A/V 200V 0-.05 A/V 0-.5 A/V 0-3 A/V 400V 0-.025 A/V 0-.25 A/V 0-1.5 A/V
RBL488 600-40-800

OPERATING RANGES (FULL SCALES) Voltage: 20 Volts, 200 Volts, 600 Volts Current: 2 Amps, 20 Amps, 40 Amps Power: 800 Watts Short Circuit: 0.035 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 2A 20A 40A 20V 0-.05 A/V 0-.5 A/V 0-1 A/V 200V 0-.005 A/V 0-.05 A/V 0-.1 A/V 400V 0-.0025 A/V 0-.025 A/V 0-.05 A/V Low Ohms Mode Range 2A 20A 40A 20V 0-.5 A/V 0-5 A/V 0-10 A/V 200V 0-.05 A/V 0-.5 A/V 0-1 A/V 400V 0-.025 A/V 0-.25 A/V 0-.5 A/V
800 Watt Outline



This data sheet is believed to be correct at time of publication and Transistor Devices, Inc. accepts no responsibility for consequences from printing errors or inaccuracies. Specifications are subject to change without notice.