Power Supplies, Inverters, and Electronic Loads from TDI


	RBL 3000/4000 Series

	• Full Product PDF

TDI

Home •

Products •

TDI - Divisions •

Request a Quote •

Engineering & Reliability •

Contact •

Cust Service •

Email TDI •

Features

	• High Speed Adjustable Slew Rate • Front Panel or Remote Control • Operation to Less Than 200mv • Pulse Load Shaping • Full Range Switching • Quiet Variable Speed Fans
General Specifications

OPERATION Constant Current: 0 to selected full scale current Prog. Accuracy (Range): (high/med) ranges: ±0.25% (low) range: ±0.5% Regulation: ±0.1% of selected full scale Constant Resistance: Constant Resistance mode operates in Amps/Volt units entered in ohms or A/V Prog. Accuracy: ±3% of selected full scale Regulation: ±3% of selected full scale Constant Voltage: 0 to selected selected full scale Prog. Accuracy (Range): (high/med) ranges:±0.25% (low): ± 0.5% Regulation: ±0.15% of selected full scale Constant Power: 0 to full scale power Prog. Accuracy: ±3% of full scale Regulation: ±3% of full scale ANALOG MODE Ext. Prog: 0 to 10 Volts input yields 0 to selected full scale loading in all operating modes. Input Impedance: 330k Ohms Prog. Response: Limited by internal adjustable slew rate limiter PULSE MODE Frequency: 0.06Hz to 20kHz Accuracy: 0.1% Duty Cycle: 10 - 90%(Analog) Accuracy: 0.1%	Adjustable Slew Rate: Max: 0 to full scale in 10µS Min: 0 to full scale in 10mS OUTPUT SIGNALS Current Sample Output: Scaling: 10 Volts = selected full scale Accuracy: ±0.5% of selected full scale Sync Output: Timing: Synchronous with pulse generator. Output: Sink with 10k pull up to +15V PROTECTION Current Limit: Analog Models: Approximately 105% of selected full scale current Voltage Limit: Analog Models: Load disconnect at 105% of selected full scale voltage Power Limit: Analog Models: Approximately 4250 Watts Thermal: Load disconnect at internal temperature of 105°C Undervoltage: Load inhibited at less than1 Volt, when enabled MISCELLANEOUS AC Input: User Selectable 100VAC, 120VAC, 200VAC, 240VAC, ±10%, 48 - 62 Hz @ 350W Ambient Temp: 0°C to 40°C

SAFE OPERATING AREA & SPECIFICATIONS

The RBL 4000 series will provide the full capabilities of the RBL family in an intuitive and easy to use manually controlled model. All functions and range switching features are presented for complete flexibility in a development lab environment. For complex current waveforms, remote analog programming is maintained across the series.
RBL 100-600-4000

OPERATING RANGES (FULL SCALES) Voltage: 10 Volts, 50 Volts, 100 Volts Current: 20 Amps, 200 Amps, 600 Amps Power: 4000 Watts Short Circuit: 0.003 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 20A 200A 600A 10V 0-1 A/V 0-10 A/V 0-30 A/V 50V 0-.2 A/V 0-2 A/V 0-6 A/V 100V 0-1 A/V 0-1 A/V 0-3 A/V Low Ohms Mode Range 20A 200A 600A 10V 0-10 A/V 0-100 A/V 0-300 A/V 50V 0-2 A/V 0-20 A/V 0-60 A/V 100V 0-1 A/V 0-10 A/V 0-30 A/V
RBL 400-600-4000

OPERATING RANGES (FULL SCALES) Voltage: 20 Volts, 200 Volts, 400 Volts Current: 20 Amps, 200 Amps, 600 Amps Power: 4000 Watts Short Circuit: 0.010 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 20A 200A 600A 20V 0-.5 A/V 0-5 A/V 0-15 A/V 200V 0-.05 A/V 0-5 A/V 0-1.5 A/V 400V 0-.025 A/V 0-.25 A/V 0-.75 A/V Low Ohms Mode Range 20A 200A 600A 20V 0-5 A/V 0-50 A/V 0-150 A/V 200V 0-.5 A/V 0-2.5 A/V 0-15 A/V 400V 0-.25A/V 0-2.5 A/V 0-7.5 A/V
RBL 600-200-4000

OPERATING RANGES (FULL SCALES) Voltage: 20 Volts, 200 Volts, 600 Volts Current: 2 Amps, 20 Amps, 200 Amps Power: 4000 Watts Short Circuit: 0.035 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 2A 20A 200A 20V 0-.05 A/V 0-.5 A/V 0-5A/V 200V 0-.005 A/V 0-.05 A/V 0-.5 A/V 600V 0-.0016 A/V 0-.016 A/V 0-.166 A/V Low Ohms Mode Range 2A 20A 200A 20V 0-.5 A/V 0-5 A/V 0-50 A/V 200V 0-.05 A/V 0-.5 A/V 0-5 A/V 600V 0-.016 A/V 0-.166 A/V 0-1.666A/V
RBL 1000-100-3000

OPERATING RANGES (FULL SCALES) Voltage: 100 Volts, 500 Volts, 1000 Volts Current: 2 Amps, 20 Amps, 100 Amps Power: 3000 Watts Short Circuit: 0.033 Ohms max. CONSTANT RESISTANCE RANGES High Ohms Mode Range 2A 20A 100A 100V 0-.01 A/V 0-.10 A/V 0-.50 A/V 500V 0-.002 A/V 0-.02 A/V 0-.10 A/V 1000V 0-.001 A/V 0-.01 A/V 0-.05 A/V Low Ohms Mode Range 2A 20A 100A 100V 0-.10 A/V 0-1.0 A/V 0-5 A/V 500V 0-.02 A/V 0-.20 A/V 0-1.0 A/V 1000V 0-.01 A/V 0-.10 A/V 0-.50 A/V
4000W Outline


This data sheet is believed to be correct at time of publication and Transistor Devices, Inc. accepts no responsibility for consequences from printing errors or inaccuracies. Specifications are subject to change without notice.