| Features |
 |
 |
•
High Speed Adjustable
Slew Rate
•
Front Panel or Remote
Control
•
Operation to Less
Than 200mv
•
Pulse Load Shaping
•
Full Range Switching
•
Quiet Variable Speed
Fans
|
| General
Specifications |
|
|
|
OPERATION
Constant Current: 0 to selected full scale current
Prog. Accuracy
(Range): (high/med) ranges: ±0.25%
(low) range: ±0.5%
Regulation: ±0.1% of selected full scale
Constant Resistance: Constant Resistance mode
operates in Amps/Volt
units entered in ohms or A/V
Prog. Accuracy: ±3% of selected full scale
Regulation: ±3% of selected full scale
Constant Voltage: 0 to selected selected full scale
Prog. Accuracy
(Range):
(high/med) ranges:±0.25%
(low): ± 0.5%
Regulation: ±0.15% of selected full scale
Constant Power: 0 to full scale power
Prog. Accuracy: ±3% of full scale
Regulation: ±3% of full scale
ANALOG MODE
Ext. Prog: 0 to 10 Volts input yields 0 to selected full
scale loading in all
operating modes.
Input Impedance: 330k Ohms
Prog. Response: Limited by internal
adjustable slew rate limiter
PULSE MODE
Frequency: 0.06Hz to 20kHz
Accuracy: 0.1%
Duty Cycle: 10 - 90%(Analog)
Accuracy: 0.1% |
Adjustable Slew Rate:
Max: 0 to full scale in 10µS
Min: 0 to full scale in 10mS
OUTPUT
SIGNALS
Current Sample Output:
Scaling: 10 Volts = selected full scale
Accuracy: ±0.5% of selected full scale
Sync Output:
Timing: Synchronous with pulse generator.
Output: Sink with 10k pull up to +15V
PROTECTION
Current Limit:
Analog Models: Approximately 105% of selected full
scale current
Voltage Limit:
Analog Models: Load disconnect at 105% of
selected full scale voltage
Power Limit:
Analog Models: Approximately 4250 Watts
Thermal: Load disconnect at internal
temperature of 105°C
Undervoltage: Load inhibited at less than1
Volt, when enabled
MISCELLANEOUS
AC Input: User Selectable 100VAC,
120VAC, 200VAC, 240VAC,
±10%, 48 - 62 Hz @ 350W
Ambient Temp: 0°C to 40°C |
| |
| SAFE OPERATING
AREA & SPECIFICATIONS |
|
| The RBL 2000
watt analog programmable series is a compact, simple to
program, 2000 watt electronic load package. Featuring all
the capabilities of the RBL488 family, including the wide
range of models to choose from, the RBL 2000W analog programmable
series will fit most of your load and space requirements.
Master/slave parallel operation is standard throughout the
RBL family. Full scale range switching, and quiet variable
speed fans remain standard. |
| RBL 100-300-2000
|
|
|
OPERATING
RANGES (FULL SCALES)
Voltage: 10 Volts, 50 Volts, 100 Volts
Current: 20 Amps, 200 Amps, 300 Amps
Power: 2000 Watts
Short Circuit: 0.005 Ohms max.
CONSTANT RESISTANCE RANGES
High Ohms Mode
Range 20A 200A 300A
10V 0-1 A/V 0-10 A/V 0-15 A/V
50V 0-.2 A/V 0-2 A/V 0-3 A/V
100V 0-.1 A/V 0-1 A/V 0-1.5 A/V
Low Ohms Mode
Range 20A 200A 300A
10V 0-10 A/V 0-100 A/V 0-150 A/V
50V 0-2 A/V 0-20 A/V 0-30 A/V
100V 0-A/V 0-10 A/V 0-15 A/V
|
 |
| RBL488 50-300-2000 |
|
|
OPERATING
RANGES (FULL SCALES)
Voltage: 20 Volts, 200 Volts, 400 Volts
Current: 20 Amps, 200 Amps, 300 Amps
Power: 2000 Watts
Short Circuit: 0.010 Ohms max.
CONSTANT RESISTANCE RANGES
High Ohms Mode
Range 20A 200A 300A
20V 0-.5 A/V 0-5 A/V 0-7.5 A/V
200V 0-.05 A/V 0-5 A/V 0-.75 A/V
400V 0-.025 A/V 0-.25 A/V 0-.375 A/V
Low Ohms Mode
Range 20A 200A 300A
20V 0-5 A/V 0-50 A/V 0-75 A/V
200V 0-.5 A/V 0-2.5 A/V 0-7.5 A/V
400V 0-.25A/V 0-2.5 A/V 0-3.75 A/V |
td>
|
| RBL 600-100-2000 |
|
|
OPERATING
RANGES (FULL SCALES)
Voltage: 20 Volts, 200 Volts, 600 Volts
Current: 2 Amps, 20 Amps, 100 Amps
Power: 2000 Watts
Short Circuit: 0.035 Ohms max.
CONSTANT RESISTANCE RANGES
High Ohms Mode
Range 2A 20A 100A
20V 0-.05 A/V 0-.5 A/V 0-2.5 A/V
200V 0-.005 A/V 0-.05 A/V 0-.25 A/V
600V 0-.0016 A/V 0-.016 A/V 0-.083 A/V
Low Ohms Mode
Range 2A 20A 100A
20V 0-.5 A/V 0-5 A/V 0-25 A/V
200V 0-.05 A/V 0-.5 A/V 0-2.5 A/V
600V 0-.016 A/V 0-.166 A/V 0-.833A/V
|
|
| 2000W Outline |
|
| 
|
| This
data sheet is believed to be correct at time of publication
and Transistor Devices, Inc. accepts no responsibility for
consequences from printing errors or inaccuracies. Specifications
are subject to change without notice. |
